John,
No mystery - the stock K3/K3S includes the 2.7kHz filter or the 2.8kHz
with the upgrade. So CW transmit has to work with that filter - the DSP
does the rest.
So if you select a CW width filter for CW transmit, you will get the ERR
TXF message.
73,
Don W3FPR
On 1/10/2019 5:52 PM, John Simmons wrote:
Interesting to note that CW transmit requires the SSB filter not the CW
filter.
-John NI0K
Don Wilhelm wrote on 1/10/2019 4:47 PM:
I forgot to say that most modes will use the 2.7/2.8 kHz for transmit.
The exceptions are AM and FM.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com