Thanks Vic Guess I need to spend some quality time in the filter configuration portion of the manual. Did manage to get the BW set so I use CW again but need to really setup the filters by BW.
Thanks all! Regards, Mark, K1RX > On Jan 10, 2019, at 3:50 PM, Vic Rosenthal <k2vco....@gmail.com> wrote: > > Select AM mode and then go to CONFIG:FLTX. > Or (better) use the he configuration tab of the K3 utility, as Don suggested. > > Victor 4X6GP > >> On 10 Jan 2019, at 21:04, Mpridesti <mpride...@yahoo.com> wrote: >> >> Ok understand except how do you select AM and have it stay? >> >> Went to the CONFIG menu and selected FLTX (it shows CW in al FL numbers) >> Tried to select a different mode I.e. AM but it does not stay AM >> >> Regards, >> Mark, K1RX >> >> >>> On Jan 10, 2019, at 1:49 PM, Victor Rosenthal 4X6GP <k2vco....@gmail.com> >>> wrote: >>> >>> This error is caused by selecting a filter other than the 2.8 or 2.7 kHz >>> filter as the transmit filter. Use CONFIG:FLTX to select that filter for >>> CW/DATA/SSB. (Except if you have FM (13 kHz) or AM filters (6 kHz) you must >>> select those filters in the FM and AM modes). >>> >>> 73, >>> Victor, 4X6GP >>> Rehovot, Israel >>> Formerly K2VCO >>> CWops no. 5 >>> http://www.qsl.net/k2vco/ >>>> On 10 Jan 2019 20:08, Mpridesti via Elecraft wrote: >>>> Strange issue >>>> I setup the K3 for diversity RX >>>> Now I can not transmit CW. I get an ERR TXF >>>> indication. What needs to be changed to correct? >>>> Regards, >>>> Mark Pride >>>> 603-231-8965 >> ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com