Folks, I posted this on the WSJT-X reflector but got no replies. Perhaps someone here has the answer.
--------------- Using Windows 10... Joy... I have WSJT-X set up to use the K3s USB Audio Codec, input & output. Both are selected as Mono. The codec is selected in the computer. I have found no way to get the K3s to transmit unless the K3s USB codec is set to default device in the computer. If I have another soundcard/option selected in the computer, the K3s will indeed present transmit mode as WSJT-X signals it to do, but there is no RF generated from the K3s. It's Lights on, nobody home. WSJT works fine but also transfers any computer sound to the K3s during transmit. If nothing is playing on the computer and the codec is selected as default, I have no trouble with anything WSJT-X related. This is how I have had to have it working for the last 10 months. However, I recently discovered a youtube was playing on another page and that audio was coming through with my WSJT transmission. This is unacceptable. Bottom line seems to be, I must have the K3s USB codec selected as default in the windows sound control panel or I cannot transmit with WSJT-X. There must be another something I'm missing but I can't seem to find it. Any suggestions? 73, Gary KA1J ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
