On Fri, Mar 15, 2019 at 9:36 AM Don Wilhelm <[email protected]> wrote:
> ...you should be using DATA A mode, and not AFSK A.... > ============== Don, thanks for your comments and the info on your website. Thanks also to the others who replied. I am not using AFSK A mode. I never should have said anything about AFSK -- I only mentioned it to explain that the WSPR signal comes from the audio tone generated by the software. I have verified that I'm getting audio out of the computer and into the KX3 mic jack. The mic bias is set to off. I'm transmitting into a dummy load, swr = 1. The meter seems to show the right display (SWR 1 bar, power 2 bars), but when I touch the mic gain knob the display goes blank. I can no longer get the display showing the ALC, no matter what I do. Despite all this the KX3 does seem to be transmitting correctly at least part of the time -- but at other times it does not. If I could figure out what is happening with the ALC display I think I could get everything going properly. Any more thoughts? Tony KT0NY On Fri, Mar 15, 2019 at 10:01 AM Tony Estep <[email protected]> wrote: > On Fri, Mar 15, 2019 at 9:36 AM Don Wilhelm <[email protected]> > wrote: > >> ...you should be using DATA A mode, and not AFSK A.... >> > ============== > Yes, I am not using AFSK A mode. I never should have said anything about > AFSK -- I only mentioned it to explain that the WSPR signal comes from the > audio tone generated by the software. > > Anyway, Don, thanks for your comments and the info on your website. Thanks > also to the others who replied. > > 73, > Tony KT0NY > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
