First, in Data modes, do *not* set MAIN:MIC+LIN to ON. As Joe has explained, you need to set MAIN:MIC+LIN to OFF and MAIN:MIC SEL to LINE.
When you are using WinWarbler, all radio control functions are handled by Commander. Commander must be running, and must be interfaced with the radio. The RTTY sub-mode selector is on the General tab of Coimmander's Config window (upper right quadrant). If you don't see it, Commander is not communicating with the radio, and you need to correct that first. Unless you are using a hardware PTT method on a separate COM port from rig control, PTT is also handled by Commander (that is what the Xcvr Ctrl App setting in the WinWarbler configuration means). The PTT buttons on the main Commander window need to be working; if they don't switch the radio into and out of transmit, you need to fix that, otherwise WinWarbler will be unable to control PTT via Commander. 73, Rich VE3KI On Wed, Mar 20, 2019 at 12:12 AM Peter Dougherty <[email protected]> wrote: > Hi Rich/all, > > Well I managed to find the thing that was really messing me up overall, but > I'm still having massive RTTY issues. > > What had been happening was no AFSK tones for RTTY were getting through, > and > no voice files for SSB. The key (as I think you mentioned on the N1MM > reflector) was the MENU: MIC+LIN setting on the K3s. Once I set that to ON > I > got voice files. But there's literally nothing I can do to get out of LSB > voice mode when WinWarbler is in RTTY mode. > > Right now, on the RTTY tab, in the Modulation and Transceiver Mode section > I > have AFSK with the LSB button ticked. I've tried both RTTY mode and DATA-L, > which Joe suggested. As I switch WinWarbler between CW, SSB, and RTTY, when > I get to RTTY the radio is placed into LSB (voice) mode, not DATA-A, which > is the desired result. There is no PTT either, the radio just stays in LSB > receive.There is no RTTY SUB MODE setting on the General tab. I guess Dave > removed it after your wrote the wiki; however I changed the DATA-L to RTTY. > No change. > > Since the Elecraft portion of this setup has been solved (Mic+LIN), the > rest > is related to DX Labs, so I'm going to take this last bit of setup to their > groups.io forum to conserve bandwidth on this reflector. > > - pjd > > -----Original Message----- > From: [email protected] <[email protected]> > On > Behalf Of Richard Ferch > Sent: Tuesday, March 19, 2019 10:27 PM > To: [email protected] > Subject: Re: [Elecraft] Sending AFSK RTTY > > <http://www.dxlabsuite.com/dxlabwiki/K3PSKRTTY>. > > 73, > Rich VE3KI > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
