Sverre,
That answer depends ---
If you want to connect the SDR directly to the antenna, put the TEE
between the ANT OUT and the preamp.
OTOH, if you want to have the preamp in-line for the SDR input, put the
TEE between the preamp output and the ANT IN connector.
If you chose to use the preamp with the SDR, you may have to do some
work on the powering and activation of the preamp.
73,
Don W3FPR
On 4/9/2019 6:48 AM, Sverre Holm (LA3ZA) wrote:
But what if there is a PR6-10 preamp in this path. Where should the
splitter/TEE-adapter be in that case?
In brief, it takes a TEE adapter and 2 short pieces of coax. Put the
adapter between the 2 pieces of coax, and then connect one coax to ANT
OUT and the other to ANT IN.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
