The Signalink provides only the audio path to / from the computer and
radio.
You will need either the RS232 or USB interface between the radio and
computer to handle the frequency control and PTT command.
73
Bob, K4TAX
On 4/15/2019 9:03 AM, Doug Turnbull wrote:
Dear OMs and YLs,
I am going to help a friend get onto FT8. He has a new Tigertronics
SignaLink, with the header for the K3 and appropriate cables for the K3.
This however does not in and of itself provide the ability to shift band or
frequency in the case of Fox Hound mode.
Is it correct to say that a cable from the K3 RS232 port possibly via
the P3 to the PC is all that is required to gain this frequency shifting
capability. The software being used other than what comes with the
SignaLink is standard WSJTX Version 2.? from K1JT's stable.
I use FT8 some here but have a MicroKeyer II. This is my first time
using a SignaLink. Your guidance is appreciated. Thank you in
advance.
73 Doug EI2CN
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
