In WK host mode, you just send ASCII characters to the WK and it creates
the Morse. The only characters that will create Morse code are A-Z,
0-9, and some punctuation ... that is only characters for which there is
a Morse equivalent. There are some host mode commands that will send a
few prosigns such as AR.
I can only speak for N1MM+ but if you set it and the K3 to have PTT and
Keying on DTR-RTS, N1MM+ sends Morse on the key line, not KY commands to
the CAT port.
73,
Fred ["Skip"] K6DGW
Sparks NV DM09dn
Washoe County
On 5/22/2019 9:19 AM, Don Wilhelm wrote:
Gregg,
I believe the question is more properly stated as "Does the logging
program format the string of ASCII characters as a "KY" command for
Elecraft gear?"
I have come to believe that it does not - it just sends ASCII
characters in a format acceptable for the WinKeyer.
73,
Don W3FPR
On 5/22/2019 12:06 PM, [email protected] wrote:
If I am not mistaken the logging programs sends ASCI characters to the
keyer, which in turn generates morse.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
