That doesn't work Wes, the problem is simpler than that. However, Don
has confirmed the behavior, and now it's time for me to be a "Real Ham"
and do something here in NE Sparks NV [instead of on the list] to fix
"my" problem. Don's [and one other's] solution with 10 memories is a
first-run candidate. Since I haven't been on SSB in years, ignoring what
happens to VFO B may be an answer too. [:-)
73,
Fred ["Skip"] K6DGW
Sparks NV DM09dn
Washoe County
On 6/4/2019 4:31 PM, Wes wrote:
I do what Don suggests. That said, I think if you do an A/B it will
fix your problem, if I understand it correctly.
Wes N7WS
On 6/4/2019 4:21 PM, Don Wilhelm wrote:
Fred and all,
I have observed what you found. On Channel Hopping, VFO A follows
the hop to the next channel, but VFO B does not.
While a "fix" may be coming sometime, it is not likely to be coming
soon. So I propose a workaround.
The simple solution is to set 10 channel hopping memories instead of
only 5. 5 for SSB/DATA and 5 more for CW. I doubt that you are
using all 100 memory slots in the K3.
Arrange them any way you want - each CW memory next to the SSB
memory, or go through all 5 SSB memories and then the next 5 are CW.
Put some identifier in the label so you can see which is which
without referring to the frequency.
73,
Don W3FPR
On 6/4/2019 3:02 PM, Fred Jensen wrote:
This began as a simple question, I can't understand why it is so
hard to explain: K3 frequency memories hold frequency, mode, and
DSP BW for both VFO A and VFO B. I used the K3 Frequency Editor to
load the CW parameters into VFO A and USB parameters into VFO B in 5
consecutive memory channels. Those 5 are "ganged together" with an
"*" in the name, IIRC.
When I rotate the Big Knob, I expected the VFO's to rotate through
the channels [end-around]. VFO A does, but VFO B does not follow,
it remains on whatever channel I originally selected.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
