Something new has come up with the K3s/JTDX settings and I can't find where to adjust it to make a change. This is new, it has been fine till a couple days ago & maybe the recent win 10 update nailed me again?
Till now, when setting the levels for Tx for FT8, I would adjust the setting on the screen for 4-5 bars with the last one flickering by adjusting the output with the speed/Mic knob. The line level would be somewhere around 5-7 to get this reading. Now I have what seems like hyper-sensitivity, overdrive in that I now get 5 solid bars with none flickering at line level 2, I get no bars at line level 1. With the K3s set at 20W drive: At line level 0 I have no output. At line level 1 I have 18W & no bars At line level 2 I have 5 bars and 18W output. There is no adjustment to give me 1, 2, 3 or 4 bars. I have tried setting the windows sound settings at different values with no success, this issue persists. Any idears? Thanks, Gary KA1J ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
