Go to the Win10 volume mixer. Turn down the wsjt slider to about 30% from the bottom. Now the K3 Lin In control will have the proper adjustment sensitivity.
Sent from my iPhone ...nr4c. bill > On Jun 15, 2019, at 7:43 PM, Gary Smith <[email protected]> wrote: > > Something new has come up with the > K3s/JTDX settings and I can't find where > to adjust it to make a change. This is > new, it has been fine till a couple days > ago & maybe the recent win 10 update > nailed me again? > > Till now, when setting the levels for Tx > for FT8, I would adjust the setting on the > screen for 4-5 bars with the last one > flickering by adjusting the output with > the speed/Mic knob. The line level would > be somewhere around 5-7 to get this > reading. > > Now I have what seems like > hyper-sensitivity, overdrive in that I now > get 5 solid bars with none flickering at > line level 2, I get no bars at line level > 1. > > With the K3s set at 20W drive: > > At line level 0 I have no output. > > At line level 1 I have 18W & no bars > > At line level 2 I have 5 bars and 18W > output. > > There is no adjustment to give me 1, 2, 3 > or 4 bars. > > I have tried setting the windows sound > settings at different values with no > success, this issue persists. > > Any idears? > > Thanks, > > Gary > KA1J > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
