Bill & all those who replied, Thanks. I had tried turning everything to around 52 in the windows device but that did not resolve the issue. I dropped it to 1/3 and indeed that resolved the issue. I've no idea why things are so different than they were but They are what they are.
Thank you! 73, Gary KA1J > Go to the Win10 volume mixer. Turn down the wsjt slider to about 30% > from the bottom. Now the K3 Lin In control will have the proper > adjustment sensitivity. > > Sent from my iPhone > ...nr4c. bill > > > > On Jun 15, 2019, at 7:43 PM, Gary Smith <[email protected]> wrote: > > > > Something new has come up with the > > K3s/JTDX settings and I can't find where > > to adjust it to make a change. This is > > new, it has been fine till a couple days > > ago & maybe the recent win 10 update > > nailed me again? > > > > Till now, when setting the levels for Tx > > for FT8, I would adjust the setting on the > > screen for 4-5 bars with the last one > > flickering by adjusting the output with > > the speed/Mic knob. The line level would > > be somewhere around 5-7 to get this > > reading. > > > > Now I have what seems like > > hyper-sensitivity, overdrive in that I now > > get 5 solid bars with none flickering at > > line level 2, I get no bars at line level > > 1. > > > > With the K3s set at 20W drive: > > > > At line level 0 I have no output. > > > > At line level 1 I have 18W & no bars > > > > At line level 2 I have 5 bars and 18W > > output. > > > > There is no adjustment to give me 1, 2, 3 > > or 4 bars. > > > > I have tried setting the windows sound > > settings at different values with no > > success, this issue persists. > > > > Any idears? > > > > Thanks, > > > > Gary > > KA1J > > > > > > ______________________________________________________________ > > Elecraft mailing list > > Home: http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:[email protected] > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > > Message delivered to [email protected] > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
