If the a/b switch causes the problem to move, then it is something connected to 
bandwidth (etc.) settings and not a hardware issue with the subrx. The a/b 
switch doesn’t change which receiver goes to which ear (etc.)

Victor 4X6GP 

> On 2 Jul 2019, at 3:02, Robert G Strickland via Elecraft 
> <[email protected]> wrote:
> 
> I put "problem" in quotes because it's not clear where the "problem" is: me 
> or the radio.
> 
> I recently purchased an Elecraft assembled and tested K3S with a subreceiver 
> and its own 400cps filter. The main receiver has the following filters: 2.8, 
> 1.9, 500 & 200. When I listen to both receivers through good quality 
> headphones, the subreceiver sounds muffled, dull, maybe a bit less volume 
> when the gain and audio settings are identical, all the while the main 
> receiver is crisp and clear. Reversing the head phones reverses the effect 
> which, I think, rules out my hearing and hearing aids.  Reversing things with 
> the A/B switch makes the left channel muffled and dull. I've tried a whole 
> lot of different setup parameters, read the manual and Cady's book carefully, 
> but I can't come up with anything the brightens up the subreceiver. Any 
> suggestions?
> Thanks.
> 
> ...robert
> -- 
> Robert G Strickland, PhD ABPH - KE2WY
> [email protected]
> Syracuse, New York, USA
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[email protected]
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [email protected] 
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected] 

Reply via email to