On a Windows computer the USB com port will be something other than “1”.
Sent from my iPhone ...nr4c. bill > On Jul 18, 2019, at 10:03 AM, Rajiv Dewan <[email protected]> wrote: > > Hello, > > I have KIO3B (USB interface) in my K3. It was working well. Single USB for > audio, and CAT. > > Suddenly, now the CAT part is not working. Here are some aspects: > * RS232 in K3/Config shows USB > * Serial port 1 shows up in device manager on the windows computer when the > USB is plugged in. The sound codecs are working. > * Nothing communicates with the K3 CAT any more (K3 utility, and logging > programs do not see the K3 on the com1.) > * I tried it on a new laptop with a fresh USB cable. Exactly the same issue. > > Any help appreciated. > > Raj, N2RD > K3 sn 170 > > -- > Raj Dewan, N2RD > [email protected] > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
