I used to like that feature with the Icom's, but touch-screens make it redundant now.
73, Charlie k3ICH -----Original Message----- From: [email protected] <[email protected]> On Behalf Of Don Wilhelm Sent: Saturday, July 20, 2019 1:48 PM To: Kevin, N4TT <[email protected]>; Elecraft Reflector Reflector <[email protected]> Subject: Re: [Elecraft] Feature Request: Shifting VFO Kev and all, No vote on that dynamic VFO tuning for me. It would only be suitable for me if I could turn it off. I have used a couple transceivers that had that type of tuning and it drove me nuts. 73, Don W3FPR On 7/20/2019 1:38 PM, Kevin, N4TT wrote: > Consider one of the settings for your computer mouse is shifting > resolution. This allows you to move the mouse real fast to get from > one end of three monitors to the other. And then, when you slow down, > the mouse goes into micro-resolution mode and you can be very precise > in your movements. This may be a Logitech feature. > > I was thinking the same concept could be used for the VFO. I'm > familiar with the Fine/Course and RATE buttons but I was thinking > (danger Will > Robinson) that it would be nice to quickly shift to the next RTTY > signal and then automatically switch to the FINE selection based on > how fast you turn the VFO. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
