Don,
I don't see 60M working either. I'll check these tomorrow after work.
Neil
On 8/5/2019 2:20 PM, Don Wilhelm wrote:
Neil,
Does 60 meters work, but not 40 meters?
The only things that could 40 meters to fail after installing the
K60XV are:
1) C6 is not the correct 4.7 pF value - it will be marked either 4.7
or 479.
2) Relay K1 not working properly, check the orientation and soldering.
3) P2 and/or RF J15 not installed properly.
73,
Don W3FPR
On 8/5/2019 11:14 AM, Neil Zampella wrote:
Hi all,
need some advice. I have a K2, and it was working fine. Then I put
together the K60XV option and installed it. Messed something up as 40M
Tx went away. The rig switches to Tx, but I do not see any power
coming out of the system.
---
This email has been checked for viruses by AVG.
https://www.avg.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
