Neil, When you did initial setup of the K60XV, did you set D19 to Yes? Cheers, Alan
Alan D. Wilcox, W3DVX 570-916-9590 (cell, text) https://WilcoxEngineering.com http://www.eham.net/reviews/detail/6768 ... Elecraft Client Comments http://amazon.com/author/alandwilcox Williamsport, PA 17701 > On Aug 5, 2019, at 19:43, Neil Zampella <ne...@techie.com> wrote: > > Don, > > I don't see 60M working either. I'll check these tomorrow after work. > > Neil > > On 8/5/2019 2:20 PM, Don Wilhelm wrote: >> Neil, >> >> Does 60 meters work, but not 40 meters? >> >> The only things that could 40 meters to fail after installing the >> K60XV are: >> >> 1) C6 is not the correct 4.7 pF value - it will be marked either 4.7 >> or 479. >> >> 2) Relay K1 not working properly, check the orientation and soldering. >> 3) P2 and/or RF J15 not installed properly. >> >> 73, >> Don W3FPR >> >> On 8/5/2019 11:14 AM, Neil Zampella wrote: >>> Hi all, >>> >>> need some advice. I have a K2, and it was working fine. Then I put >>> together the K60XV option and installed it. Messed something up as 40M >>> Tx went away. The rig switches to Tx, but I do not see any power >>> coming out of the system. >>> >> > > --- > This email has been checked for viruses by AVG. > https://www.avg.com > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to a...@wilcoxengineering.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com