For some reason, I could not reply to the mail list. The ATU on my KX3 is not tuning. When I hit the tune button I hear the relays and the display shows an SWR of 25.4-1 Here is what I have done so far. Under the menu, the ATU MD is set to Auto I hooked the KX3 to a dummy load with a good piece of coax and it still showed SWR of 25.4-1. I opened the KX3 up, removed the batteries, removed the 2-meter transverter, and removed the ATU. The cable from J1 to the BNC was well connected at both ends. Upon inspection, I could find no loose cables or parts in the rest of the KX3. I reassembled everything and I am still getting an SWR of 25.4-1 with the dummy load. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected]
This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
