It sounds like you need to contact Elecraft support … Grant NQ5T K3 #2091 KX3 #8342
> On Aug 13, 2019, at 6:42 PM, Aaron <[email protected]> wrote: > > For some reason, I could not reply to the mail list. > > The ATU on my KX3 is not tuning. When I hit the tune button I hear the > relays and the display shows an SWR of 25.4-1 > Here is what I have done so far. > Under the menu, the ATU MD is set to Auto > I hooked the KX3 to a dummy load with a good piece of coax and it still > showed SWR of 25.4-1. > I opened the KX3 up, removed the batteries, removed the 2-meter > transverter, and removed the ATU. The cable from J1 to the BNC was well > connected at both ends. Upon inspection, I could find no loose cables or > parts in the rest of the KX3. > I reassembled everything and I am still getting an SWR of 25.4-1 with the > dummy load. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
