An SWR of 25.4:1 is usual indicator of Mo Antenna connected. Sent from my iPhone ...nr4c. bill
> On Aug 13, 2019, at 7:09 PM, Grant Youngman <[email protected]> wrote: > > It sounds like you need to contact Elecraft support … > > Grant NQ5T > K3 #2091 KX3 #8342 > >> On Aug 13, 2019, at 6:42 PM, Aaron <[email protected]> wrote: >> >> For some reason, I could not reply to the mail list. >> >> The ATU on my KX3 is not tuning. When I hit the tune button I hear the >> relays and the display shows an SWR of 25.4-1 >> Here is what I have done so far. >> Under the menu, the ATU MD is set to Auto >> I hooked the KX3 to a dummy load with a good piece of coax and it still >> showed SWR of 25.4-1. >> I opened the KX3 up, removed the batteries, removed the 2-meter >> transverter, and removed the ATU. The cable from J1 to the BNC was well >> connected at both ends. Upon inspection, I could find no loose cables or >> parts in the rest of the KX3. >> I reassembled everything and I am still getting an SWR of 25.4-1 with the >> dummy load. > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
