Grant, Something else I've noticed since getting the KXPA100 is the Select knob on the PX3 gets flaky if it's turned too fast. It seems to work fine if you turn it slowly. For instance when setting the Ref Level if the Select control is turned very fast the display just jitters and doesn't change the level. But when turned at a very slow rate the level changes appropriately. I didn't notice this behavior before I put the KXPA in line.
You might try that and let me know what happens. Thanks, Don, K5DW On Sun, Aug 18, 2019 at 2:41 PM Grant Youngman <[email protected]> wrote: > Don … > > Thanks. That answers my question. You’re right, it’s close enough if > you’re tuning slowly, but if you try to tune quickly the PX3 cursor doesn’t > follow so well. > > Grant NQ5T > KX3 (8342)/KXPA100 > > > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
