Just out of curiosity, is the serial speed set to 38400? Running slower would make a difference.
73, Brian, K0DTJ > On Aug 18, 2019, at 15:41, Grant Youngman <[email protected]> wrote: > > I fiddled with it a bit, and really didn’t notice any major changes in how > the PX3 controls function. Not that there aren’t any. > > The simple solution is to simply set PA Mode: Off when generally tuning > around. > > Grant NQ5T > KX3 (8342)/KXPA100 > > >> On Aug 18, 2019, at 5:30 PM, Donald Wines <[email protected]> wrote: >> >> Grant, >> >> Something else I've noticed since getting the KXPA100 is the Select knob on >> the PX3 gets flaky if it's turned too fast. It seems to work fine if you >> turn it slowly. For instance when setting the Ref Level if the Select >> control is turned very fast the display just jitters and doesn't change the >> level. But when turned at a very slow rate the level changes appropriately. >> I didn't notice this behavior before I put the KXPA in line. >> >> You might try that and let me know what happens. >> >> Thanks, >> Don, K5DW > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
