Don...
I got one of the original Clifton Lab boards and installed it in my K2
[after you had serviced the unit]. Installation required a choice of
pick off points: right after the first mixer, and somewhere else a bit
more isolated [don't have the instructions before me]. I chose the
first. It works very well although the LO leakage is significant and
results in a pretty big birdie on the pan display. This is not really a
problem. That said, do you have any experience with this item using the
more isolated pick off? If so, does the isolated pick off eliminate the
birdie from the display? Thanks for your comments.
...robert
On 8/19/2019 15:27, Don Wilhelm wrote:
Clark,
I have installed the original Z10000 buffer amp in several K2s. They
work very well. The DXE version is prebuilt, and should simplify
installation.
I see 3 reviews on the DXE website (but none for the K2), and they all
show it as excellent and easy to install.
73,
Don W3FPR
On 8/19/2019 10:54 AM, Clark Macaulay wrote:
Looking for comments about the reissue of this amp as I'm considering
adding a panadapter to my venerable (and very capable) K2. There is only
one review at DXE and it is not very complimentary.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
--
Robert G Strickland, PhD ABPH - KE2WY
[email protected]
Syracuse, New York, USA
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
