Robert,
Yes, the alternate connection point will reduce the K2 LO strength.
Be aware that there are other causes for that center spike on the
display, including soundcard and cabling inadequacies. If those are the
real issue for you, the LP-Pan forum is the best place for advice.
73,
Don W3FPR
On 8/19/2019 7:47 PM, Robert G Strickland via Elecraft wrote:
Don...
I got one of the original Clifton Lab boards and installed it in my K2
[after you had serviced the unit]. Installation required a choice of
pick off points: right after the first mixer, and somewhere else a bit
more isolated [don't have the instructions before me]. I chose the
first. It works very well although the LO leakage is significant and
results in a pretty big birdie on the pan display. This is not really a
problem. That said, do you have any experience with this item using the
more isolated pick off? If so, does the isolated pick off eliminate the
birdie from the display? Thanks for your comments.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
