Kevin,
While that may be an interesting exercise, it only takes one dit for the
KPA/KAT500 to sense the frequency and react accordingly.
The only thing missing is the ability to track the VFO frequency during
receive.
73,
Don W3FPR
On 8/31/2019 7:33 PM, Kevin McQuiggin wrote:
Hi Andy:
Thanks for the suggestion. Using the computer would let me control the KAT500
and KPA500 for sure, but what I am looking for is seamless band tracking and
antenna output tracking between the rig (in this case KX3 and KXPA100) and the
[KAT500/KPA500] block.
If I can interface the [KX3/KXPA100] combo to the antenna/tuner, then there
would be full, seamless integration as there is with the K3. That’s the goal.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
