Olof,
Are you connected to the K3S using the USB cable?
If so, check the soundcard that WSJT-X is trying to use for audio output
- it should be USB AUDIO CODEC.
You must NOT have anything plugged into the K3S LINE IN jack unless you
are using a different soundcard than the internal one.
If the soundcard is correct, and you are using DATA A mode, set the
input to LINE in the menu.
You will have to set the audio levels (there are multiple controls -
some in your computer software and the LINE level (mic knob) of the K3S.
You must end up with 4 bars solid on the ALC meter with the 5th bar
flashing.
See the article on my website www.w3fpr.com
73,
Don W3FPR
On 11/26/2019 11:38 AM, Olof Lundberg wrote:
I have requests to do FT8 on top band from 3B8 right now. I have receive
going OK and also CAT but I can't get audio from WSJT-X on a WIndows 10
Home Pro laptop to get into my K3S. ANyone out there who can help?
73 Olof G0CKV 3B9HA 3B9M
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
