Hi Wes, I worked 3B8M on 11-24-19 at 1721 on 14.096 MHz using my K2/10 running 5 Watts. From my QTH here near Indianapolis that is a 9,900+ mile path.
Mark, WB9CIF -----Original Message----- From: [email protected] <[email protected]> On Behalf Of Wes Sent: Wednesday, November 27, 2019 12:41 To: [email protected] Subject: Re: [Elecraft] K3S WSJT and FT8 Nothing to do with your problem but I had to say that I copied, and called unsuccessfully, 3B8M on 40-meter CW on 11-24-19 @ 1651Z, which is 0951 AM local time here in Arizona. This is 3 hours past my SR on a >11,000 mile path. Who needs FT8? I'll look for you on 80 and 160. Wes N7WS On 11/26/2019 11:28 PM, Olof Lundberg wrote: > Thank you all. I thought I had all this done but the obfuscated Windows 10 > audio settings caught me out probably. It turned out that it was the transmit > chain of audio level settings wsjt pwr - windows spkr audio - K3 mic/line > level that had to be ’tuned’. So next step will be to read up on how you do > the qsos. 3B8M might do a test run on 17m later today and I will try to do > 160 and perhaps 80 around sunset/sunrise night between Wed and Thu my time. > That would be 1830 and 0120 UTC respectively. > > 73 and, again, many thanks for the quick help > > Olof G0CKV > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
