Don,
You are correct it works fine this way. I do it that way. Only one
suggestion, use VOX. once tone is on the radio goes into transmit rather
nicely. I do this for all the digital modes and have run into no
problems. Once Elecraft added the internal sound card it really made
operating easier.
73,
Barry
K3NDM
------ Original Message ------
From: "Don Wilhelm" <[email protected]>
To: "Olof Lundberg" <[email protected]>; [email protected]
Sent: 11/26/2019 12:14:02 PM
Subject: Re: [Elecraft] K3S WSJT and FT8
Olof,
Are you connected to the K3S using the USB cable?
If so, check the soundcard that WSJT-X is trying to use for audio output - it
should be USB AUDIO CODEC.
You must NOT have anything plugged into the K3S LINE IN jack unless you are
using a different soundcard than the internal one.
If the soundcard is correct, and you are using DATA A mode, set the input to
LINE in the menu.
You will have to set the audio levels (there are multiple controls - some in
your computer software and the LINE level (mic knob) of the K3S. You must end
up with 4 bars solid on the ALC meter with the 5th bar flashing.
See the article on my website www.w3fpr.com
73,
Don W3FPR
On 11/26/2019 11:38 AM, Olof Lundberg wrote:
I have requests to do FT8 on top band from 3B8 right now. I have receive
going OK and also CAT but I can't get audio from WSJT-X on a WIndows 10
Home Pro laptop to get into my K3S. ANyone out there who can help?
73 Olof G0CKV 3B9HA 3B9M
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
