Thank you very much Don; I have been testing and when do a tune the power is always 100 w although I have it set to 15 w in the TUN PWR menu., always 100 w.
In normal operation, cw or ssb, I can choose the power between 0 and 100 w without problem. I will start checking the wattmeter. Thank you very much for your help. 73 DX de Pedro, EA4KD -----Mensaje original----- De: Don Wilhelm [mailto:[email protected]] Enviado el: sábado, 08 de febrero de 2020 20:55 Para: Pedro, EA4KD; [email protected] Asunto: Re: [Elecraft] K3 always 100 W Pedro, If it were a K2, I could tell you that the diodes in the wattmeter have been damaged and need to be replaced. Those symptoms are almost the same. The K3 controls power in a similar manner, and I would suggest you start with the wattmeter - I believe it is on the KAT3 board in the K3. 73, Don W3FPR On 2/8/2020 2:39 PM, Pedro, EA4KD wrote: >>From yesterday my k3 always gives 100 w in any band although select any > other power from 0 to 100, always 100 w in the external meter. > > Also the swr display shows "- -" and power 0 in any case. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
