Hi,
Start with Jim's, (K9YC), pages, at:
http://www.k9yc.com/publish.htm
Read most of them, (the titles will direct you), then you will have a
far better idea of how to reduce RFI without a shielded room...
After that look at:
https://www.nk7z.net/rfi-now-house-cleaning/
I cleaned up my shack, with very good results...
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist
ARRL Asst. Director, NW Division, Technical Resources
On 2/26/20 5:14 AM, [email protected] wrote:
Aside from installing ferrite on all cables (not sure why this isn't
integrated somehow if it's that large of an issue) would having the shack
walls lined with a grounded screen help reduce/eliminate radio noise?
Is the cost/effort worth it?
My wife and I are planning to build a house in a few years and I'm planning
out my station.
Based on the noise issues I have and have researched it sounds like I need a
shielded room where all cables in/out are wrapped in ferrite and power is
routed through a 1:1 transformer OR true sine wave UPS.
Then I still have to deal with computer equipment noise and anything else to
get a clean signal where the ground noise is low.
Jerry Moore
Cell: 803-431-1870
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
