Rick,
When you move into the new shack location, consider getting the new AUX
cables from Elecraft. If your original ones have a large (about 1/4
inch diameter) cable, the new ones are smaller and more flexible.
73,
Don W3FPR
On 3/5/2020 5:57 PM, Rick Bates, NK7I wrote:
Don et al,
On occasion the signal that the amp goes into Operate mode is not passed
along (or received, I don't know which), which means that the K3 will
operate at higher than required drive level, for a moment only because
the KPA500 will fault VERY quickly protecting everything.
However, I am unable to come up with a viable pair of suspenders, so I
simply try to be more aware when the amp goes hot.
The reverse can be true too; the K3 thinks the amp is still in operate
(but it isn't) and transmits at lower than expected output.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
