While you're adjusting the output drive for the amp on each band; make
sure it's EACH band, including 60M (100 watt limit in the US) and 30M
(200 watt limit in the US).
Yes, those bands also, because operator error (fatigue, excitement,
rush, brain slip) WILL happen and having those QRP bands preset in the
amp could save you grief.
Hope for the best, plan for the worst; this is planning for the worst,
stuff happens.
73,
Rick NK7I
On 3/6/2020 11:37 AM, Bob McGraw K4TAX wrote:
Tony et al:
Go to the K3S CONFIG menu and PWR SET. Set the value to PER BAND.
Then exit this menu by pressing MENU/CONFIG. There IS NO value to set
at this point. Then with the KPA500 on and in OPER mode, while in
RX, set the PWR value on the K3S to 20 watts or what ever power you
wish to drive the amp with for that band. That is saved for that mode
and band. Then on to the next band.
When the KPA500 is in STBY mode the power value is what is set on the
K3S for barefoot operation. When the KPA500 is switched to OPER then
the power value is what you have set for that mode and band. This
does require the KPA500 to communicate with the AUX cable. See page
12 Fig 3 of the KPA500 manual for the configuration.
If you have the K3S, the KPA500 and the KAT500, then see page 5of the
KAT500 manual, Fig 1 for the correct cables and configuration.
As they say, it is all in the manuals.
73
Bob, K4TAX
On 3/6/2020 1:07 PM, Tony wrote:
Tony, The Config Menu has a Per-Band power setting (PWR SET = PEr
bAnd) that will set the power output depending on the band selected.
If you use the Aux cable between the K3 and KPA500 is is fully
automatic and seamless. 73 George AI4VZ
George:
I must be missing something because when I select PER BAND in the
config menu, there's no power setting to set.
It doesn't display the power like TUN PWR does where the tune power
is shown within that menu item so you can adjust it.
I have to order the AUX cable, but in the meantime I'd like to use
this setting with the K3S so any suggestions would be appreciated.
Tony
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
