On 3/21/2020 8:07 AM, Jim Rhodes wrote:
The AFSK works
in DATA A, so it should work in AFSK A. Has to be an unintentional glitch.
That may depend on your RTTY software. By convention, MOST RTTY AFSK
software (MMTTY, 2TONE, GRITTY) depends on the radio transmitting LSB,
and that's how Elecraft radios do it -- the AFSK setting is LSB.
Virtually all other digital mode software uses USB, and DIGITAL A in
Elecraft radios is USB. Both AFSK and DIGITAL A take computer-encoded
audio from the LINE IN.
In AFSK-A mode, Baud rate and RTTY tone frequencies settings in the
radio must match the frequencies sent by the computer.
Other settings that can prevent RTTY from working are audio drive level
from the computer and VOX.
73, K9YC
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
