Starting with a clean MMTTY installation and carefully going thru the minimal required changes to that installation to make it work, my K3 now works as expected. I am able to successfully transmit using AFSK.
Many thanks to all of you for your suggestions, screen shots, helpful advice, etc. You guys are great! Special thanks to NG7M and N7US who both provided ample assistance. Apparently 7th district guys are particularly helpful! Frustratingly, I don't know what about the installation was incorrect. It could well have been something intermittent in the K3. Or some silly misconfiguration on my part. I hope it was an MMTTY configuration issue but only time will tell. I will try sticking with AFSK for now, but possibly switch to FSK in the future in order to avoid the inherent difficulties with obtaining a clean TX signal with AFSK. Joe N9OK -- Sent from: http://elecraft.365791.n2.nabble.com/ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
