If all you want to do is create a panadapter, I suggest that you use the IF out of your K3s. I do that and it works nicely. This obviates the need for SDR protection while transmitting.
73 Barry K3NDM On Thu, Apr 2, 2020, 1:52 PM Graziano Roccon (IW2NOY) <[email protected]> wrote: > Hello, > > i ordered a Colibrì Nano > (https://eesdr.com/en/products-en/receivers-en/colibrinano-en) > and i am thinkg to connect the Colibrì antenna through the RX ANT OT of > the K3s tu use the colibrì and his software like a panadapter for the > K3s. > The colibrì can't accept "IF OUT", so i will use RX ANT OUT from XV3B to > give antenna signal to the Colibrì. > The Colibrì is one the best SDR (usb) out there with a sample rate of > max 3mhz at 16 bit and 768 khz at 24 bit, the dedicated software > ExpertSDR2 is fantastic anche can used with SDC to have cw skimmer spots > and DX cluster spots on the panadapter. > > > I want to use the Colibrì only like a panadapter and use the K3s to > transmit, syncing the two radio frequncies. > > I would like to know if there are know problem to use this > configuration, especially when i will go in TX with the K3s. > Maybe somebody did it this before me. > There is a protection system that disconnect RX ANT OUT when the K3s go > in TX ? > There is something to configure in the menu ? > Simply, there is a risk for the safeness of the Colibrì connect to the > antenna RX OUT ANT ? > I wouldn't burn the Colibrì with RF or RFI coming from the radio. > > Any help would be appreciated. > > > Thanks a lot, Graziano IW2NOY > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
