That's where the problem was in my 2 K3S's. Ed.. AB4IQ
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Don Wilhelm Sent: Monday, April 6, 2020 1:09 PM To: Rich <[email protected]>; Elecraft <[email protected]> Subject: Re: [Elecraft] KPA100 and Audio Issue Rich, Well, since the KPA100 is an option for the K2 (and not for any other transceiver), I did not make a typo. Since you have the K3S, the 100 watt amplifier is the KPA3. That is why one has to be careful when specifying designations of options. As I recall, that distorted audio on the K3S is a symptom of a failure in the LPA on the RF Board. Contact [email protected] to get some points to check. 73, Don W3FPR On 4/6/2020 1:43 PM, Rich wrote: > Just to make sure that was a typo you said K2?? > > I did your test on my K3S and I am getting about 55 watts on the meter > > Any other ideas? > > Thank you so much > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
