I always use 15.6v and with double heavy cable to minimise VD,
On 7/4/20 4:08 am, Bob McGraw K4TAX wrote:
I’d say that 10 - 12 volts is too low. The supply should be 13.8 to 14.8.
Bob, K4TAX
Sent from my iPhone
On Apr 6, 2020, at 10:52 AM, Rich <[email protected]> wrote:
I am having an issue with distorted audio once the KPA100 kicks in at about
10-12v.
The KPA100 is putting out 100 watts
I have re-calibrated the radio with no change.
I am testing with the hand mic and a dummy load. Which should eliminate any
external devices causing it
Any suggestions as to what can be causing this issue?
Thanks
Rich
K3RWN
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
