While the K3/K3S rear mic jack is physically TRS, it is connected
as if it is a mono (Tip, Sleeve) jack. A "balanced" 1/4" cable
through a 1/4 TRS to 3.5mm TRS adapter will not work properly as
one side of the microphone will be floating.
73,
... Joe, W4TV
On 2020-05-11 10:02 PM, Nr4c wrote:
1/4 to 1/8 TRS and plug in rear mic jack.
Sent from my iPhone
...nr4c. bill
On May 11, 2020, at 5:34 PM, Tony <[email protected]> wrote:
All:
I'd like to connect an XLR mic cable that has a 1/4 inch TRS plug to my K3S. It
seems the only way to do that is wire a female 1/4 inch TRS to an 8-pin mic
connector.
It would be easier to use a 1/4 to 1/8th inch adapter and connect through the
rear mic input, but I don't believe it accommodates balanced mics?
Thanks,
Tony
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
