On 5/11/2020 8:41 PM, Jim Rhodes wrote:
If you are terribly concerned about connecting a balanced mic to an
unbalanced input there are plenty of commercial adapters out ther, some of
them even cost more than $10.
There is NO problem connecting a pro dynamic mic, which is balanced, to
an unbalanced input. All it takes is a simple adapter, XL-female to
1/8-in TRS plug. Connect pin 2 to the TRS tip, pins 1 and 3 to the TRS
sleeve. Make sure that Bias is OFF -- dynamic mics don't like DC.
There is no easy way to connect a pro balanced ELECTRET mic to an
unbalanced input.
73, Jim K9YC
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
