Gareth,
You probably don't have the correct antenna port assigned to the sub
receiver. I'm not in front of my rig, but I believe you need to push
and hold A/B (B Set) to get to the sub receiver, at that point be sure
the correct antenna port is selected.
Rich - N5ZC
On 5/26/2020 10:05 AM, Gareth M5KVK wrote:
Hi there
I bought a s/h K3S a couple of years ago (SN 10901). It has a KRX3A installed,
but I’ve never tried to use it until now. When I enabled the sub receiver this
morning, I found I was getting no signal.
I’ve checked various CONFIG settings and it’s set to use the MAIN ANT and it’s
AF is independent of the K3S. In an attempt to make progress, I reviewed the
installation instructions.
Item 4, after enabling TECH MD, is Tap DISP and rotate VFO B to display SYN1
and SYN2. I do not see these items. Any idea how to debug this?
73
Gareth, M5KVK
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
