I tried that, Richard. ANT definitely says MAIN but still no signal. Gareth
On 26/05/2020, 18:40, "Richard Thorne" <[email protected]> wrote: Gareth, Try this. - Turn on the sub receiver by pushing sub - Push and hold B Set so the display shows b set - Be sure the ant shows Main and not AUX. If it shows AUX push the ANT button to toggle between the two. May not be the problem but I've found for some reason my sub receiver is on the Aux antenna. My rig doesn't have the ant tuner either. Rich - N5ZC On 5/26/2020 11:21 AM, Gareth M5KVK wrote: > Thanks, Richard > There is no ATU, so there is only the one ANT to select. However, I have checked that CONFIG KRX3 has Ant=ATu (even though there is no ATU, only this or BNC are offered as options) > > Gareth > > On 26/05/2020, 16:31, "Richard Thorne" <[email protected]> wrote: > > Gareth, > > You probably don't have the correct antenna port assigned to the sub > receiver. I'm not in front of my rig, but I believe you need to push > and hold A/B (B Set) to get to the sub receiver, at that point be sure > the correct antenna port is selected. > > Rich - N5ZC > > On 5/26/2020 10:05 AM, Gareth M5KVK wrote: > > Hi there > > I bought a s/h K3S a couple of years ago (SN 10901). It has a KRX3A installed, but I’ve never tried to use it until now. When I enabled the sub receiver this morning, I found I was getting no signal. > > > > I’ve checked various CONFIG settings and it’s set to use the MAIN ANT and it’s AF is independent of the K3S. In an attempt to make progress, I reviewed the installation instructions. > > > > Item 4, after enabling TECH MD, is Tap DISP and rotate VFO B to display SYN1 and SYN2. I do not see these items. Any idea how to debug this? > > > > 73 > > > > Gareth, M5KVK > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
