Thanks Don Plugging a Stereo (3 conductor) does not cause the radio to go into TX with Menu:MIC BTN set to Ptt.
Looking like a bad MH3. I did ohm out the MIC between ground and the PTT line and it did show open. I would be expecting a short. Mike va3mw On Tue, Jun 30, 2020 at 1:18 PM Don Wilhelm <[email protected]> wrote: > Mike, > > Do you have a normal stereo plug available? - or a stereo audio cable > with nothing on the far end? If so, plug that in and see if the same > thing happens - make certain it is in all the way. If not, the MH3 has > a problem. > If it still goes into transmit, the KX2 has a problem. > > 73, > Don W3FPR > > On 6/30/2020 12:59 PM, Michael Walker wrote: > > Hi All > > > > I have had a kx2 since they first came out and I have chased this problem > > since day 1. But, since I never use it on SSB, I have never worried > about > > it. s/n 337 > > > > Everything I plug in the MH3 Mic, the radio goes into TX. I have the > > latest firmware on it. > > > > If Menu:MIC BTN is set to OFF, it does not TX with the PTT button on the > MIC > > If Menu:MIC BTN is set to PTT, the radios into TX as soon as you plug the > > MIC in > > If Menu:MIC BTN is set to Ptt UP.dn, the radio goes into TX as soon as > you > > plug the MIC in > > > > VOX is off > > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
