Mike,

I am wondering if the shaft (sleeve) on the mic plug is just a bit too long - try backing the plug out a tiny bit at a time (thickness of heavy paper) to see if that takes care of it.

That is all I can think of.  I suggest you contact [email protected] for additional suggestions.

The most positive test would be for you to try that same mic in a different KX3 or KX3.  If it works OK, then you will know that you have a problem with your mic jack in the KX2 - even though it behaved with the stereo plug. I would not suggest taking the mic apart, I suspect from your ohmmeter measurement that the mic is OK and the problem is with the plug.

73,
Don W3FPR

On 6/30/2020 4:48 PM, Michael Walker wrote:
Hi

No, nothing else plugged into the radio.

As for a 2nd Mic, not at this time and I am not at home near my workbench which has lots of bits to try things.  If I have time tonight, I will open up the Mic and do some more tracing.

I think we have gone as far as we can go at this point given the tools I have.  I'll do more lab work on it when I get back home next week.

I got the internal mic to work as it should, so I can make do with that for the time being.

thanks for your help.

73, Mike va3mw


On Tue, Jun 30, 2020 at 4:45 PM Don Wilhelm <[email protected] <mailto:[email protected]>> wrote:

    Mike,

    Solution unknown - either you have a bad mic plug on that MH3, or
    there
    is a problem with your KX2 mic jack.
    Do you know anyone else who has a KX2 or KX3 that could try your
    microphone?

    73,
    Don W3FPR

    On 6/30/2020 3:02 PM, Michael Walker wrote:
    > Ops, missed that.  I used shield ground, not logic ground.
    >
    > However, when I tested Ring 1 to Ring 2, it is open and then shorts
    > when you push the PTT button.  This seems to be working as designed.
    >
    > I did confirm that mic is plugged in all the way and did a close
    > visual look at it to make sure.
    >
    >


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected] 

Reply via email to