What mic are you using? Is anything else plugged into the radio?
Sent from my iPhone ...nr4c. bill > On Jun 30, 2020, at 1:03 PM, Michael Walker <[email protected]> wrote: > > Hi All > > I have had a kx2 since they first came out and I have chased this problem > since day 1. But, since I never use it on SSB, I have never worried about > it. s/n 337 > > Everything I plug in the MH3 Mic, the radio goes into TX. I have the > latest firmware on it. > > If Menu:MIC BTN is set to OFF, it does not TX with the PTT button on the MIC > If Menu:MIC BTN is set to PTT, the radios into TX as soon as you plug the > MIC in > If Menu:MIC BTN is set to Ptt UP.dn, the radio goes into TX as soon as you > plug the MIC in > > VOX is off > > Next test was to try the internal MIC. > > My testing is in LSB on 40M. > > Touching XMIT puts the radio into TX, but the only way out of TX is to hit > the ATU button. Hitting XMIT again does nothing. Unfortunately, that > doesn't work either. > > I was headed out on a Canoe trip tomorrow and was hoping to use SSB as a > mode while I was in the Great White North. > > Any thoughts of the next steps to solve this in a few hours? > > Mike va3mw > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
