OK, I figured this out, sort of. Every time I’ve had trouble with the KAT3 not tuning, the K3 has been in split mode.
By taking the K3 out of split mode, I’m able to turn on 6m correctly. Oddly, though, when I return to split mode, it still works. I’m not sure why I see this issue, but I’m glad I can work around it. Split mode is often configured due to the WSJT-X settings, depending on the frequencies used. > On Sep 5, 2020, at 9:01 PM, w4sc <[email protected]> wrote: > > Bill, > > I had an issue very similar. The “Automatic TXGain” procedure is performed > at 52 MHz. I was using a 50 ohm load attached, and at 50.125 the KAT3 have > trouble matching the load. Also it appears there is not enough power out in > the lower part of the band for the SWR bridge to function. > > Part of the problem is I believe, the f/w switches the KPA3 ON at 8 watts > instead of the usual 12……….. > > Performing a MANUAL TX Gain procedure on 6M may help. > > Here is link to post I made several weeks ago. > > https://www.mail-archive.com/[email protected]/msg241436.html > > 73 de Ben W4SC > > Sent from Mail for Windows 10 Bill Coleman, AA4LR, PP-ASEL Mail: [email protected] Web: http://boringhamradiopart.blogspot.com Quote: "Not within a thousand years will man ever fly!" -- Wilbur Wright, 1901 ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
