The K3 allows split in data modes, but only provided both VFOs are already in data mode. The K3 will not allow cross-mode split between Data and CW/SSB.
If you are seeing "SPL N/A" when you try to enable split with VFO A in a Data mode, what that tells me is that VFO B is in CW or SSB, not in Data mode. When VFO B is not already in the same mode as VFO A, tap A>B twice to transfer the VFO A mode into VFO B before pressing Split. 73, Rich VE3KI W4SC said: The K3 only allows the "split" mode for SSB and/or CW to be enabled, at least from \ panel. Trying to enable split in any other mode, the VFO B window flashes "N/A". \ You may have different indications / results if the split command is sent via the \ CAT, and a mode other than CW or SSB is selected. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
