Andy,
Thanks, but I'm not using software I wrote. I'm using the remote
software from Elecraft, and that is the software I'm talking about not
seeing if the power is on or off. I was hoping that I was just missing
seeing something.
Gordon - N1MGO
On 10/9/2020 20:56 PM, Andy Durbin wrote:
Sorry - cut/paste error - should be:
If a KAT500 is powered but off it will respond to command ps; with PS0;
If a KAT500 is powered and on it will respond to command ps; with PS1;
If a KAT500 is not powered it will not respond to ps;
Andy, k3wyc
________________________________
From: Andy Durbin
Sent: Friday, October 9, 2020 5:51 PM
To: elecraft@mailman.qth.net <elecraft@mailman.qth.net>
Subject: KAT500 remote
"I use the KAT500 remote software and it works great. I have only one problem with
it, I can not tell if the power is on or off."
If a KAT500 is powered but off it will respond to command ps; with PS0;
If a KAT500 is powered and on it will respond to command ps; with PS1;
If a KAT500 is not powered it will not on it will not respond to ps;
Powered status can also be found by checking the response to ;
No response if not powered
; response if powered.
Hopefully any remote control software you use will be smart enough to apply
these tests and indicate the result.
Andy, k3wyc
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to gordon.lapo...@gmail.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com