Jim, If it is a manual switch then must be a short run from KPA to switch so why not connect to ANT1 ANT2 on KPA and switch with KPA. KPA stores separate solutions for each ANT. de Dave K5MWR
On October 16, 2020 2:26:13 PM CDT, Jim McCook <[email protected]> wrote: >Dave, yes, one coax from the amp to a manual switch. Your question is >the same as mine. Somehow the KPA1500 should know by sensing a rise in > >SWR and shutting down most of the drive power or output somehow so the >tuner can go through its motions without excessive output or a fault. > >______________________________________________________________ >Elecraft mailing list >Home: http://mailman.qth.net/mailman/listinfo/elecraft >Help: http://mailman.qth.net/mmfaq.htm >Post: mailto:[email protected] > >This list hosted by: http://www.qsl.net >Please help support this email list: http://www.qsl.net/donate.html >Message delivered to [email protected] -- Sent from my Android device with K-9 Mail. Please excuse my brevity. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
