Precisely what I thought, Jim. The KPA-1500 already adjusts the K3's
output power when the amp switches to OPER, from 100 watts in STBY to a
preset, much lower value in OPER, but I don't know if they can store and
recall drive power levels by band and antenna
73, Pete N4ZR
Check out the Reverse Beacon Network
at <http://reversebeacon.net>, now
spotting RTTY activity worldwide.
For spots, please use your favorite
"retail" DX cluster.
On 10/16/2020 3:54 PM, Jim Brown wrote:
...I suspect that, to have the system automatically change power in
the manner that Pete needs, Elecraft would need to write software to
remember and change drive levels from the transceiver on command from
the KPA1500.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
