All, Pulling my hair out here. I have been trying to get my KX2 to work on PSK31. After many attempts I got it working perfectly with DigiPan, but I'm not sure how. Then something happened that I have found is a problem for me with this radio. I must have turned a knob, hit a key or some such thing as it stopped decoding. I find the knobs and buttons are too close to one another for these old eyes and fingers. I am using DATA A mode, I have the BW at 4kHz and center freq of 1.5 AGC is off, RF gain is 0dB. NB and NR is off. I suspected I might have screwed up the USB/LSB setting somehow, but HamScope has a "reverse" function which does not help. Is there anyone who could walk me through the settings that might be screwing this up? Tnx es 73 Bob WB0POQ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected]
This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
